Opinion

Tech: Porsche Taycan Aerodynamics Explained

Two Videos Diving into Electric Sports Car Secrets

In this video, we (Wouter Remmerie and team at AirShaper) will go over the aerodynamic features of the Porsche Taycan and prepare it for road testing! Special thanks to the Porsche Centre in Mechelen, Belgium, for letting us play with this fantastic car. 😊

We optimized the rear of the Porsche Taycan using our Aerodynamic Shape Optimization technique (to have it generate more downforce). In this video, we get up close with all the other special features of this car (underfloor, diffuser, wheels, etc.).

Underfloor

Underfloor At the front splitter, the air jumps underneath the car and accelerates as it gets into the channel formed by the road surface and the underfloor of the car. This increased velocity will reduce the pressure, creating a suction force pulling the car downward (which is good for handling). On electric cars, the underfloor can be made very smooth & flat, as it sits below the battery pack and as they have very little exposed components so the air maintain its velocity and connects with the diffuser at the rear, where it connects to the wake behind the car, reducing drag, increasing downforce and so on.

Wheels

Porsche Taycan
The aero starts up front

Wheels are a major source of aerodynamic drag on cars. They are large, unshielded elements rotating through the air, acting like a mixer. Not only do they generate drag themselves, they also create turbulent air downstream, which can increase drag/reduce performance elsewhere.

Porsche has fitted the car with air curtains, which are channels in the front bumper. The opening at the front accepts the high pressure that is at the nose of the car, which is then sped up to exit at high velocity through a slot at the rear of the front bumper, just ahead of the front wheel. This creates a curtain, shielding the turbulent air coming off the rotating wheel.

Another feature is the aerodynamic rims. To limit their drag, Porsche created a rim that is more “covered” than a regular rim. Second, the profile of the spokes has been designed in such a way that the air nicely slides across the spokes, instead of being pushed away by more blunt spoke shapes.

Finally, Porsche also air deflectors in front of the wheels: these are small “ramps” that divert the air so it doesn’t hit the wheels directly (where it would create a large wake). These are present both at the front and rear wheels.

Rear Spoiler

The active rear spoiler will automatically extend when you are going fast enough to improve downforce and aero balance of the car.

Coolers

Air is forced through coolers and this represents an energy loss. So, when you don’t need full cooling power, it’s good for efficiency to (partially or fully) close the entrance to the coolers. This will reduce the energy lost on air going through the coolers and will make the air go around the car instead.

Ride Height

The Porsche Taycan has an extremely low drag coefficient of 0.22, and one of the tricks to achieve this is to lower the ride height of the car. Lowering the ride height at low speeds would be impractical for ground clearance because of speed bumps, etc., so it is lowered dynamically as the car picks up speed. A lower ride height also has a positive impact on the handling of the car, as downforce typically increases with reduced ride height.

Tufts

We equipped the car with tufts, which are small strands of wool that will align themselves with the local orientation of the airflow. This allows us to analyze flow patterns and see where the air has detached and/or has become turbulent.

Porsche Taycan
A slippery style

Next video below

On our next video, we’ll take the car for a ride and compare the tuft patterns with what we saw in simulations!

In this second video on Porsche Taycan Aerodynamics, we’ll take the car to the street to compare tuft movement to simulation data. Special thanks to the Porsche Centre in Mechelen, Belgium, for letting us play with this fantastic car 😊

In our last video, we had equipped the Porsche Taycan with a number of tufts.

Rear window & spoiler

On the rear window and spoiler, none of the tufts move. This is because the flow in that area stays nicely attached and laminar. There is some slow-down of the flow due to the “negative” curvature of the window, but this doesn’t lead to separation.

Porsche Taycan
Aero improvements can come from behind

Rear wheels

The rear wheels create a turbulent zone that extends downwind (causing a lot of movement of the tufts on the rear bumper) and also upward (creating movement above the wheel arch as well). The latter extends all the way to the rear spoiler.

A-pillar and side window

As the air makes its way from the front windshield to the side window, it curves around the A-pillar. In doing so, a vortex is created which locally pushes the air upward, just behind the A-pillar. This upward motion extends further downwind at the top of the side window as well.

Front wheels

The front wheels also create a turbulent zone, which splashes out and upward. Further downstream, this zone is countered by the air coming off the front hood, which creates a zone of attached air curving downward on the flanks.

Headlamps

The headlamps are located in a “pocket” in the bodywork. As the air jumps out of this pocket, it locally separates from the bodywork and leaves behind a local bubble of separated, turbulent flow. This can be seen in both simulation and tuft movement.

More Tech from AirShaper

Tech: Coastdown Testing

Interview: Henrik Fisker Talks About the World’s Most Sustainable Vehicle

Interview: From Ferraris to Solar Cars

Analysis: Tesla Cybertruck—Is It More Streamlined Than It Looks?

Tech: Why Aerodynamics Matter

Tech: How Aerodynamics Impact EV Range

Products You May Like

38 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *